It is very important to find out the cause and solve the problem in time after the failure of the electric heater.

The electric heater is a popular liquid heating device, which can heat the liquid in a relatively short time. If it is not properly handled in the heating process, it will encounter many failures and reduce the service life of the electric heater. So what are the electric heaters that often happen in your life?

It is possible to use an electric heater for a period of time.

The electric heating wire inside the electric heater is broken and the treatment method is to replace the damaged electric heating tube.

The loosening of the line leads to bad contact, so that the line can be reconnected.

If the electric heater is in use, if the electric heating pipe is broken

The electric heating tube needs to be replaced.

Electric heater leakage

If it is electric heating pipe leakage, bake it in a oven.

If the insulation effect is still not very good, the leakage situation will still appear, it is necessary to replace the electric heating tube;

There will be leakage of water in the inlet of the junction box or the breakage of the insulated skin of the wire. It can be blown dry and wrapped with insulating tape on the damaged place.

It is very important for electric heater to find out the cause and solve the problem in time. After that, we must deal with the problems in the process of using electric heater to prevent accidents.

Gas heater is the electric heating equipment which mainly heat the gas flow. The heating element of the air heater is the stainless steel electric heating tube. There are many baffles (deflector) in the inner cavity of the heater, which guides the gas flow direction and prolongs the gas residence time in the inner cavity, so that the gas is fully heated, so that the gas is heated uniformly, and the heat exchange efficiency is improved. Heating element: stainless steel tube air heater, electric heating wire is loaded in the seamless steel pipe, the void is filled with good heat conductivity and insulation of magnesium oxide powder after a pipe. When the current through the high temperature resistance wire, the surface of the heat pipe diffusion through the heating crystallization of magnesia powder, and then pass to the heated air, to achieve the purpose of heating.