How should the working pressure of the heat conduction oil heater be controlled?

The safety problem of heat-conducting oil electric heater is very important, and the heat transfer oil pressure has great influence on the safety of the heat conducting oil heater, and has obvious influence on the heating effect. Therefore, we should control the pressure of its work in a timely manner.

Thermal oil circulating heat conduction oil heater is realized by hydraulic pump, visible, heat conduction oil heater for thermal oil circulation is very important, the internal pressure of work is to have a great relationship, through the pump oil import and the caliber size and, if the oil pump oil outlet diameter, then the pressure will be greater heat conducting oil heat oil, oil speed, to ensure the heat conduction oil heater can have good effect on temperature control.

The fuel is installed in the stove burner heater equipment, fuel oil used as a dye, heat conducting oil heating pipe in the furnace, heating function, fuel supply air burner regulation (decision volume) and the heat conduction oil temperature changes of the three mutual restraint, timely and appropriate temperature automatic on-off fuel supply and adjust the door automatically, to achieve complete combustion, can maximize the realization of energy saving, no dust, no sulfur emissions, protect the environment, improve the heating efficiency, reduce labor intensity, reduce the production cost.

Fuel thermal oil furnace abnormal how to deal with:

Abnormal processing of heat-conducting oil furnace, normal shutdown in heat conduction, heat conduction oil furnace furnace circulating pump to continue to operate for a period of time, open the bypass, to ensure that the heat conducting oil furnace oil continues to flow in, stop air, air in the heat conduction oil furnace, until the oil temperature dropped to 100 degrees below, then the circulating oil pump we can stop in the furnace. The heat-conducting oil furnace must be checked, inspection and maintenance test instrument for hot oil furnace heater, make the operation more sensitive and more accurate and more reliable; the heat-conducting oil furnace reduces the heat load or temporarily disabled should open the bypass oil return valve, flow regulating system in heat conduction, the heat conducting oil tube with adequate flow and flow rate; heat conduction to start the ignition temperature, heat conduction due to low temperature, high viscosity, oil film thickness, so the heat conduction oil furnace furnace must strictly control the heating rate, the general should be in the following 40 - 50 C / h, the flame should be uniform, to avoid the local heat load concentration.

We can improve the heating effect of the heat-conducting oil heater in three aspects.

First, increase the heat transfer area. This is the most common way of using the general air heater, and the heat - conducting oil heater can also be used to improve the heating effect. But the heat - conducting oil heater can not only use this method to improve the heating effect.

Second, waste heat recovery. This method does not change the overall heating effect of the heat-conducting oil heater, but using the waste heat recovery can achieve the effect of energy saving and emission reduction. Using the same fuel can guarantee higher heating effect. The waste heat recovery can be realized by changing the structure of the heat-conducting oil heater. It is an indirect way to improve the heating effect.

Finally, reduce the excess air. The wind deflector is installed at the outlet of the heat conducting oil heater to control the air flow accurately through the internal flow, so that the heating effect of the heat conducting oil heater can be enhanced.