What is the most typical application of the explosion-proof electric heater?

Because the power of the electric heating pipe is relatively large, if the user ignores the safety, it will still have the hidden danger of fire safety. The safety maintenance of the explosion proof electric heater should start from two aspects of preventing the fire and the maintenance of the equipment.

How does a fire proof electric heater prevent a fire? Usually we have to do a good job in the following aspects:

It is strictly forbidden to put the electric heating pipe on the combustible or to be placed near the flammable material.

The electric heating pipe should install the plug correctly and strictly prohibit the wire head to be inserted into the socket directly, otherwise the fire will be short circuited.

The user must break off the power supply when leaving.

The resistance wire can not be used again after multiple repairs more than three times, otherwise it will cause the line overload and cause the fire.

The safe cutting flow of electric heating pipe wire must meet the capacity requirement of electric heating pipe.

Equipment application

Chemical industry materials heating and heating, some powder drying, chemical process and spray drying under certain pressure.

Hydrocarbon heating, including oil crude oil, heavy oil, fuel oil, heat conduction oil, oil, stone wax, etc.

Process water, superheated steam, molten salt, nitrogen (air) gas, water gas and so on, and so on.

Because of the advanced explosion-proof structure, the equipment can be widely applied to chemical industry, military industry, petroleum, natural gas, offshore platforms, ships and mining areas.

Functional characteristics

Small volume and high power: the heater mainly uses a cluster tubular electric heating element.

The heat response is fast, the temperature control precision is high, and the comprehensive thermal efficiency is high.

The heating temperature is high: the heater can be designed for the highest working temperature of 850 degrees C.

The temperature of the medium is uniform and the precision of temperature control is high.

Wide application and strong adaptability: the heater can be applied to explosion-proof or ordinary occasions, explosion-proof grade can reach D II B grade and C grade, and the pressure can be up to 20MPa.

Long life and high reliability: the heater is made of special electrothermal material, and its surface power load is low, and multiple protection is adopted, so that the safety and life of electric heater will be greatly increased.

Fully automatic control: according to the requirement, through heater circuit design, it can realize automatic control of outlet temperature, flow and pressure and so on, and it can be networked with computer.

The energy saving effect is remarkable, the energy produced by electric energy is almost 100% to the heating medium.