In the process of using the industrial heater, more explosion-proof heaters are needed. Because the temperature needed in the industrial heater is too high, and it needs thousands of degrees or even tens of thousands of degrees of temperature. If it is careless, it may cause the risk of explosion. It has caused us great loss of physical and property. Be sure to grasp the explosion protection of the heater.
In Chinese has always been people-oriented appeal, explosion-proof heater in various factories, explosion-proof heater, heating is fast and uniform, because of uneven heating, uneven heating will produce an explosion, so it needs the heater surface and uniform heating, low heat load, high working efficiency, the use of a heater long life.
In the industrial heater, the heater structure should be strong enough to fall for earthquake resistant ability, should be flexible, general, industrial explosion-proof heater is now relatively simple to operate, easy to install, operate the risk coefficient is not, explosion, burns, damage may be relatively small. Generally, this kind of explosion-proof heater is often used in large factories, such as oil production plants, oil depots, iron making, recycling rare metals and so on.
Fluid explosion-proof electric heaters are generally in place in the production and use of chemical and explosion-proof equipment. Its use is widely used in areas with relatively high risk factors, especially the processing of flammable and explosive materials.
How do the three-dimensional fluid explosion-proof electric heaters work? It first uses electric energy to convert into used heat energy, so as to achieve heating and heating of the material needed to be heated. In this process, the low temperature medium can flow through pipelines, pipeline formed by pressure difference, arrive at the input port to the special internal structure along the channel, in the process of moving, the heat released from the electric heating element, the self heating, arrive at the output port, obtained by setting the temperature of heated material the play.
In its work, it can automatically debug the output power according to the feedback signal from the temperature sensor loaded on the output port, and make the heated material passing through the output port uniformly heated. When adjusting the temperature higher than the heater itself under the limit, protection system installed inside can automatically switch off the power supply, can not be caused by temperature, the heated object due to excessive heat, the quality problem, also can better protect the heater itself, to avoid the high temperature make it inside the damaged element, prolonged use life.