How should the high quality heat conduction oil heater be chosen?

As we all know, heat conduction oil heater is widely used in heating equipment now, especially for some environments with high requirements for heating temperature. China's heat-conducting oil heaters are developing rapidly, and there are many new manufacturers. So for safety consideration, how should we choose high-quality products in the dazzling heat transfer heater products?

The first is the heat conduction oil electric heater temperature control precision, thermal oil heater of high quality temperature can be controlled between plus or minus 1 degrees, which is one of the most important advantages of thermal oil heater, so we must first determine that the heat conduction oil electric heater temperature control precision.

Secondly, it is necessary to consider the thermal oil heater oil temperature and oil return temperature difference, which is a parameter that determines the thermal oil heater power and safety performance of the electric heater, heat conducting oil quality in temperature for 20-30 degrees can raise the temperature to the desired temperature.

Then is the working pressure. The working pressure of the heat conducting oil electric heater is generally low, so as to ensure that the heat conduction oil heater will not leak and other failures, so as to ensure the safety of the heat conducting oil heater.

The price of heat conducting oil electric heater is not high, which saves a lot of cost and occupies a small area than traditional boiler. It is a typical small high-energy heating equipment. You must be careful when you buy it in order to prevent unnecessary security problems in the process of use.

Many advantages of heat-conducting oil furnace electric heater, the next Xiaobian mainly explain several representative advantages:

The PID self-tuning intelligent control is adopted in the uniform heating of heating, and the temperature control precision is high (+ 1 c), which can meet the strict requirements of the high process standard.

Energy saving and low operating cost. The heat conduction oil heater system is liquid closed cycle. The difference between the oil output temperature and the oil return temperature is 20-30 degrees. That is to say, heating the temperature at 20-30 C can achieve the service temperature. At the same time, the device does not need water treatment equipment and has no heat loss such as run, run, drip and leakage of steam boiler. The utilization rate of heat is very high. Compared with steam boiler, energy saving is about 50%.

The operation control and safety monitoring device are complete and complete, the heating process is fully automatic control, the operation is simple, and the installation is convenient.

It's safe. Because the system only bears the pump pressure, the heat transfer oil heating system has no explosion danger, so it is more safe.

Small volume, small area, can be installed in the vicinity of the heat equipment, no special operation, can reduce equipment investment and operation costs, recovery investment fast.