Welcome to Jiangsu Wei Neng Electric Co., Ltd. official website!

News

Product Categories

Hot Key Words

Contact Us

Jiangsu Wei Neng Electric Co., Ltd.

Tel: 0514-8860 0333 / 88600999

Mailbox: wnheater@163.com

Fax: 0514-8860 0909 / 88913066

URL: en.wnheater.com

Address: No. 3 Dazhai Road, Baoying Development Zone, Yangzhou, Jiangsu, China


How to prevent the accident of heat conduction oil and electric heater?

Your current location: Home >> News >> Industry News

How to prevent the accident of heat conduction oil and electric heater?

Date:2017-10-07 Author:Yicheng network Click:

The main danger of the heat-conducting oil and electric heater is the fire. Once the heat conducting oil from thermal oil furnace heating system leakage, due to its high temperature and flame contact or close to the flame will be ignited or spontaneous combustion caused by fire. In addition, also because of heat conducting oil furnace oil with water and other reasons, explosion accident.

To prevent the accident of heat conduction oil heater, we must start with two aspects of equipment and medium simultaneously, one is to make the equipment have enough strength and tightness, no breaking and no leakage, and the two is to make the heat conducting oil not overheated and not deteriorated in heating, normal flow and heat exchange. Mainly:

The heat-conducting oil furnace should be qualified products of national sentinel manufacturers.

Heat conduction oil heater

The installation of heat supply system for heat conduction oil and electricity heater shall be completed by the manufacturer or fixed-point installation unit with qualified quality and in accordance with the regulations.

The installation of heat supply system for heat conduction oil and electricity heater shall be completed by the manufacturer or fixed-point installation unit with qualified quality and in accordance with the regulations.

The supply unit of heat conduction oil should provide the physical and chemical properties of the heat transfer oil and should meet the requirements of the national standard. The heat conduction oil should be tested once a year in use, and the problem is found to be replaced or regenerated in time.

The air, water vapor and light components should be fully discharged during the starting of the heat conduction oil and electric heater. In operation, the flow rate of the heat conduction oil should be maintained high enough to prevent the power off from stopping the pump, so as to prevent the hot oil from overheating and coking or carbon deposition. The filter should be cleaned regularly.

The safety equipment of the heat conduction oil heater and the heating system should be complete, and the ultra - temperature and overpressure protection device should be sensitive and reliable.

We must attach great importance to the safety of the heat-conducting oil and electric heaters, keep them well in the purchase, and operate according to the regulations. In this way, there will be no serious accidents.

What problems should be paid attention to during the operation of heat conduction oil heater.

Heat conduction oil heater factory

For the operator, we should have a certain professional level and have a certificate issued by the local boiler safety inspection agency.

The heat-conducting oil electric heater has its own operation rules. Operators must strictly abide by the operation rules when operating, and the units can't change the structure of the heat conducting oil electric heater at will.

The heat conduction oil of the heat conduction oil and electric heater can not be mixed with the old and the new. The selection and use of the heat conduction oil is a very important link in the use of the heat-conducting oil heater.

Thermal oil heater must be checked for each part before use, should first find abnormal maintenance use, is strictly prohibited with operation.

Before the first time the new heat conducting electric heater is put into use, the internal pressure test shall be carried out. The test pressure is 1.5 times of the working pressure, and the leak test shall be carried out.


Tags:Heatconductionoilheater

Browse:

Contact Us

Address: No. 3 Dazhai Road, Baoying Development Zone, Yangzhou, Jiangsu, China

Tel: 0514-88603099 / 8860 0333 / 88600999

Fax: 0514-8860 0909 / 88913066

Technical support: 0514-8860 0808

E-mail: info@wnheater.com

URL: en.wnheater.com


Sweep away us
1499131786.png1499131786.png
Official website